 |
 |
 |
 |
 |
 |
 |
 |
|
How Cable Genie Works: The Cable Genie is easy
to use because of it’s unique design and construction. The Cable
Genie has two components: the Transmitter and the Handheld Detector.
The Transmitter is attached to the isolated conductor (Target
Conductor) at the near end, and at the far end the isolated conductor
is grounded common to the concentric neutrals. The Transmitter
sends a pulsed signal at a unique frequency down the Target Conductor
and returns to the Transmitter via the common concentric neutrals.
The Detector provides an audio tone and visual LED when clamped
around the Target Conductor. There is no detector response for
all the remaining conductors in the trench. The Cable Genie is
a “must have” for all maintenance procedures where cable identification
is necessary.
|
 Identifies
Individual Phases of Underground Single-Phase and Three-Phase
Cable Groups: Cable Genie provides 100% Accuracy in identifying
an individual cable within a group of energized or de-energized
cables. This allows crews to identify the desired cable without
de-energizing the remaining cables in the trench.
Transformer and Switch Cabinet Installations:
When adding a new transformer or switch cabinet to an existing
underground line, the proper cables can be easily identified.
When more than one three-phase group are routed together in
a trench, only the cables intended for the transformer or switch
cabinet need to be de-energized. The Cable Genie guarantees
the correct identification of the target cables whether it be
the selection of a single-phase cable or a three-phase group.
This assures that only de-energized cables will be spiked prior
to cutting the cable or cables for the new transformer or switch
cabinet application.
Visit our Contact Center to ask questions regarding the Cable Genie or other services we offer. 
|
